Training Holds

This is the most positive pinch we do. Perfect for big, fun moves.

The symmetrical shape is the same whichever hand you grab it with. 

Made by hand out of solid beech. 

A little rounded pinch with a slight incut. The small footprint makes it great for fitting into gaps on your board. It's symmetrical so feels the same whichever hand you grab it with. 

Made by hand out of solid beech.

A standard pinch which boards can't do without. These are nice and deep, but the totally flat profile makes your hands work hard to hold them. 

The symmetrical shape makes them the same whichever hand you grab them with.

Made by hand out of solid poplar. 

A pair of symmetrical pinches. Just over 1 pad deep and slightly incut, these pinches really force you to engage the thumb. 

Made by hand out of solid beech. 

The profile of this hold forces you to really get your knuckles up and crimp it, however unlike a lot of crimps, it remains comfy on your skin as you yank on it. 

It's small footprint makes it a great hold for filling in gaps on your board. 

Hand made out of solid beech.

A unique raised crimp rail. Designed to work best on a 45degree board. This hold has a  a slight thumb underneath and a simple flat, comfy edge for your fingers. 

Made by hand out of solid poplar. 

A slightly positive, 50mm deep 2 handed hold. A pretty juggy hold, but also great for for forcing burly moves as a gaston or undercut etc. On boards over 45degrees this hold will start to feel quite sloping! Good luck. 

It's symmetrical shape makes it the same however you grab it. 

Crafted by hand from a single piece of beech. 

A positive, 25mm deep edge. This hold has a small footprint so is great for filling in gaps on boards. It's positive enough for doing big moves, but it's certainly not a jug! A board staple. 

It's symmetrical shape makes it the same whichever hand you grab it with. 

Crafted by hand from a single piece of sycamore. 

A classic board crimp. No thumb option means there's no way to pinch it. It's 20mm depth and incut profile will work for >Font 6c/V4 climbers on steep boards. A board staple. 

 It's symmetrical shape makes it the same whichever hand you grab it with. 

Crafted by hand from a single piece of sycamore. 

Incut and small, for hard crimping. This shape forces you to crimp as there are no thumb options on its smooth underside. It's 17mm depth makes a good challenge for >font 7a/V6 climbers on steep boards.

Its symmetrical shape makes it the same whichever hand you grab it with. 

Crafted by hand from a single piece of Beech. 

A pair of symmetrical pinches designed to really pop on your board. Everybody loves smashing around on pinches - and there are perfect for just that. The slightly positive profile gives you enough purchase to really yank hard on these. Absolute board classics.

Made by hand out of solid poplar.  

A pair of our hardest pinches. Both sides are sloping to really force your thumbs into action. The holds are big enough for 2 hands for really meaty match moves, or you can simply grab on with one hand and let rip!

Made by hand out of solid poplar. 

A symmetrical pinch that's 25mm deep and very slightly incut. This hold is hard and works best for >Font 7b/V8 climbers on steep boards.

Made by hand out of solid sycamore. 

A small crimp! The edge is 10mm deep and incut, forcing you to really get your knuckles up to hold on. Ideal for climbers >Font 7b/V8 on steep boards. 

While the edge of the hold is 10mm, the body of the hold is a little deeper, giving it a bit of extra strength.

A 1 pad pinch with a slight incut. Designed to be a pretty tough hold for climbers >Font 7a/V6 on step boards. The hold is symmetrical so works the same for either hand. 

Made by hand out of solid Beech.

This range of wooden climbing holds is designed to be at home on any board. The shapes are tried and tested, classic functionality, variety and aesthetics which should really benefit any training set up that needs them.

Backing Card is 60cm X43cm for scale

Showpiece pinches: The Classic showpiece pinches feature a pair of parallel wide pinches and an incut tapered pinch that is perfect for all abilities to get used to pinching or pros to smash big moves between. Will set off any board functionally as well as visually.

This range of wooden climbing holds is designed to be a testing set for climbers in the pursuit of excellence and with difficulty considered. They will be testing on steep boards and better suited to climbers operating in the font 7's and v7 up range. That said their shapes will suit easier climbs on boards less than 30˚ overhanging.

Backing Card is 60cm X43cm for scale

Showpiece pinches: These are an XL testing set of super ergonomic hard pinches. The hourglass centrepiece pinches are 5˚ negative tapered on both sides. True vice grippers should be able to squash them into submission. The tapered pinches feature an offset of slope and slight incut to bring the knuckles up whilst really pushing onto the thumb muscle.

The Medge is a medium edge, 30mm deep with a 30-degree incut. It sits right in that middle ground between a finger jug and a crimp. These are essential holds on steep boards, giving you good coverage as you progress towards smaller holds.

The Mini Medge is the most compact version of this type of hold, taking up as little board space as possible.

Made from European Beech wood.

Width: 100mm
Depth: 30mm
Length: 70mm