beastmaker

A lovely rounded edge with just enough incut to work on a steep board. Great for forcing you to climb with good tension as its particularly hard to hold a swing on this hold.

Length: 27cm
Width: 15cm
Height: 5.5cm

Lovely comfy pockets designed for steep board climbing. Great for training open handed strength, but also accuracy. 

They come as a symmetrical pair, but are designed specifically to be comfortable for either hand. 

Each hold is CNC machined from a solid piece of hardwood. 

Length: 15cm
Width: 12cm
Height: 4cm

Great for training open handed strength on steep boards, as well as accuracy. A little more kind than the 2 finger pockets, but definitely not jugs! 

They come as a symmetrical pair, but are designed specifically to be comfortable for either hand. 

Each hold is CNC machined from a solid piece of hardwood. 

Length: 14cm
Width: 13cm
Height: 5cm

Sloping edges! These feel decent if they're flat with a foothold in just the right spot, but as soon as you grab them at weird angles or with awkward feet they become hard! 
As a result they are great for burly side pulls and undercuts as well as working body tension and full body squeeze. 

These come as a symmetrical pair, but are designed specifically to be comfortable for either hand. 

Each hold is CNC machined from a solid piece of hardwood. 

Length: 21cm
Width: 13cm
Height: 5cm

Massive jugs! 

These are perfect for warming up, chucking huge moves or (if you're that way inclined) full on endurance training. 

They are as comfy as a jug can be and you can swing around for days on these without them becoming uncomfortable. 

These come as a symmetrical pair, but are designed specifically to be comfortable for either hand. 

Each hold is CNC machined from a solid piece of hardwood. 

Length: 23cm
Width: 14cm
Height: 5.5cm 

A screw on version of our classic pinch hold. Perfectly symmetrical, so works for either hand. 

They are ideal for powerful board climbing or campussing, providing a good handful of hold which really engages the thumb for maximum squeeze training. 

Each hold is CNC machined from a solid piece of hardwood. 

Length: 27cm
Width: 10cm
Height: 6cm

A pair of tapered pinches. Each hold has a slightly incut side and a sloping side. Designed to really get the thumbs working on steep boards while being ridiculously comfy. These are a board classic. Who doesn't like launching between pinches on an overhang! 

They come as a symmetrical pair, but are designed to be comfortable for either hand. Or flip them upside down if you want a real challenge!

Each hold is CNC machined from a solid piece of hardwood. 

Length: 27.5cm
Width: 11cm
Height: 5cm

A pair of lovely rounded pinches that are designed to be hard! They're sloping all around with a slight sweet spot for the fingers and the thumb. 

These are perfect for training maximum squeeze. There's no hiding on these holds. 

They come in a symmetrical pair, but the work perfectly well whichever hand you grab them with. 

Each hold is CNC machined from a solid piece of hardwood. 

Length: 19cm
Width: 9cm
Height: 5.5cm

A juggy hold with a small footprint. Slightly less incut than our Proper Jugs, but still a big hold on a steep board. 

Great for undercuts/sidepulls/gastons for really getting the body working. Also good for endurance training in total comfort. 

They come in a symmetrical pair, but they're designed to be equally as comfy in either hand.

CNC machined out of solid hardwood.

Length: 16cm
Width: 11cm
Height: 5cm

A pair of juggy pinches, with a positive hold for your fingers and a positive thumb dimple. These are big holds for big moves, and are of course incredibly comfortable to pull on. 

They come in a symmetrical pair, but they feel lovely in either hand.

Each hold is CNC machined from a solid piece of hardwood. 

Length: 18cm
Width: 13cm
Height: 6cm

Narrow incut pinches for steep boards. These holds are reasonably positive, but very comfy to yank on. The thumb divot enables maximum squeeze, allowing you to fully engage your hand on the holds. Great for training your crimpy crush. 

Each hold is CNC machined from a solid piece of hardwood. They come as a symmetrical pair.

Length: 13.5cm
Width: 9.5cm
Height: 4.5cm

A pair of positive fingery holds, with a subtle thumb catch. 

These work great for pulling straight down as positive edges, but as a side pull or an undercut the thumb catch comes into its own, making a crimpy pinch. 

They come as a symmetrical pair. They can be held in either hand, but the thumb catch only works one way round, forcing you to use the holds differently depending on their orientation.

CNC machined out of solid hardwood.  

Length: 13cm
Width: 9cm
Height: 4cm